Special Tools
•
BO-6396
Bonding Pliers
•
BO-6392
Flanging Tool Kit
For equivalent regional tools, refer to
Special Tools
.
Note:
According to different corrosion warranties, only the regional mandatory joining methods are allowed.
Removal Procedure
Warning:
Refer to
Glass and Sheet Metal Handling Warning
in the Preface section.
Disable the SIR System. Refer to
SIR Disabling and Enabling
.
1.
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
2.
Remove the rear side door. Refer to
Rear Side Door Replacement
.
3.
Remove the rear side door outside handle. Refer to
Rear Side Door Outside Handle Replacement
.
4.
Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
.
5.
Grind the edges of the rear side door outer panel to separate the outer door panel from the door shell.
6.
Remove the rear side door outer door panel.
7.
Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
.
8.
Straighten the edges of the door shell.
9.
Installation Procedure
Align the rear side door outer panel.
1.
Verify the fit of the rear side door outer panel.
2.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
