Perform the front seat track synchronization. Refer to
Front Seat Track Synchronization
.
1.
Install the front seat (4) to the guide in front.
2.
Connect and latch the wiring harness plug (3) front seat.
3.
Connect the wiring harness plug (2) from the belt buckle.
4.
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the 2 bolts (1).
5.
Tighten
45 N·m (33 lb in)
Install the seat belt (3) to the front seat.
6.
Tighten the bolt (2).
7.
Tighten
9 N·m (80 lb in)
Install the front seat outer recliner upper finish cover (1).
8.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
9.
S e c tion 07
SEATS
Seat Hardware,Trim
and Upholstery
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
