Callout
Component Name
Preliminary Procedures
Disable the SIR system. Refer to
SIR Disabling and Enabling
1.
Remove the front floor console assembly. Refer to
Front Floor Console Replacement
.
2.
Remove the radio assembly. Refer to
Radio Replacement
.
3.
Remove the driver information display bezel. Refer to
Driver Information Display Bezel Replacement
.
4.
Remove the heater and air conditioning control. Refer to
Heater and Air Conditioning Control Replacement
.
5.
Remove the steering column lower trim cover. Refer to
Steering Column Lower Trim Cover Replacement
.
6.
Remove the steering column upper trim cover. Refer to
Steering Column Upper Trim Cover Replacement
.
7.
Remove both instrument panel outer trim covers. Refer to
Instrument Panel Outer Trim Cover Replacement - Left Side
.
8.
Remove the instrument panel compartment assembly. Refer to
Instrument Panel Compartment Replacement
.
9.
Remove the instrument panel molding. Refer to
Instrument Panel Molding Replacement
.
10.
Remove the center air outlet assembly. Refer to
Instrument Panel Center Air Outlet Replacement
.
11.
Remove the left outer air outlet assembly. Refer to
Instrument Panel Outer Air Outlet Replacement - Left Side
.
12.
Remove the right outer air outlet assembly. Refer to
Instrument Panel Outer Air Outlet Replacement - Right Side
.
13.
1
Instrument Panel Assembly Screw (Qty: 9)
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten
9 N·m(80 lb in)
2
Instrument Panel Assembly
Procedure
Note location and routing of the instrument panel wiring harness prior to removal of the instrument panel assembly
to ensure proper reinstallation.
1.
Disconnect the wiring harness from the instrument panel assembly.
2.
With the aid of an assistant, remove the instrument panel assembly from the vehicle.
3.
When replacing the instrument panel assembly, transfer all necessary components.
4.
Instrument Panel and Console Trim
BODY HARDWARE AND TRIM
S e c t i on 02
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
