Removal Procedure
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
1.
Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
2.
Support the rear axle with a tall jack stand near the shock absorber.
3.
Remove the upper shock absorber bolts (1).
4.
Remove the lower shock absorber bolt (1).
5.
Installation Procedure
Position the shock absorber to the vehicle.
1.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install NEW upper shock absorber bolts (1) and tighten to
100 N·m (74 lb in)
.
2.
Rear Suspension
SUSPENSION
S e c tion 10
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
