Warning:
In order to reduce the risk of fire and personal injury observe the following items:
• Replace all nylon fuel pipes that are nicked, scratched or damaged during installation, do not attempt to repair the sections of the
nylon fuel pipes
• Do not hammer directly on the fuel harness body clips when installing new fuel pipes. Damage to the nylon pipes may result in a fuel
leak.
• Always cover nylon vapor pipes with a wet towel before using a torch near them. Also, never expose the vehicle to temperatures
higher than 115°C (239°F) for more than one hour, or more than 90°C (194°F) for any extended period.
• Apply a few drops of clean engine oil to the male pipe ends before connecting fuel pipe fittings. This will ensure proper reconnection
and prevent a possible fuel leak. (During normal operation, the O-rings located in the female connector will swell and may prevent
proper reconnection if not lubricated.)
PREFACE
S e c tion 00
Caution Notices
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
