Callout
Component Name
Preliminary Procedure
Remove the front bumper fascia upper bracket. Refer to
Front Bumper Fascia Replacement
.
1
Headlamp Screw (Qty: 4)
Caution:
Refer to
Fastener Caution
in the Preface section.
Tip
Secure the headlamp fasteners in sequence, as indicated.
Tighten
2.5 N·m (22 lb in)
2
Headlamp Assembly
Procedure
Pull forward on the outside edge of the headlamp in order to release the up and down locator tabs on the backside of
the headlamp.
1.
Pull forward on the top inside edge of the headlamp to release the inboard up/down locator.
2.
Pull the headlamp assembly down.
3.
Pull the headlamp assembly forward far enough to access the electrical connection.
4.
Disconnect the headlamp electrical connector from the forward lamp harness connector.
5.
Remove the headlamp assembly.
6.
Aim the headlamps after installation. Refer to
Headlamp Aiming
.
7.
S e c tion 04
BODY SY
S T
E
M
S
Lighting
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
