Clean and prepare the attaching surfaces for welding.
3.
Position the body side outer panel reinforcement on the vehicle.
4.
Verify the fit of the body side outer panel reinforcement.
5.
Clamp the body side outer panel reinforcement into position.
6.
Plug weld accordingly.
7.
Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
.
8.
Paint the repaired area. Refer to
Basecoat/Clearcoat Paint Systems
.
9.
Install all related panels and components.
10.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
11.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
12.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
