Special Tools
EN 45059
Torque Angle Sensor Kit
For equivalent regional tools, refer to
Special Tools
.
Removal Procedure
Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
1.
Remove the tire and wheel assembly. Refer to
Tire and Wheel Removal and Installation
.
2.
Remove the brake drum. Refer to
Brake Drum Replacement
.
3.
Remove the plug from the drum brake actuator access hole in the backing plate. Using the access hole, install a heavy mechanic
wire (1) in order to support the brake backing plate.
4.
Remove the wheel speed sensor bolt (2).
5.
Remove the wheel speed sensor (1).
6.
Remove the wheel bearing/hub mounting bolts (1).
7.
Rear Suspension
SUSPENSION
S e c tion 10
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
