Callout
Component Name
Preliminary Procedures
Open and support the rear compartment lid.
1.
Remove the body side trim panel replacement in order to expose the tail lamp pocket nuts. Refer to
Body Side Trim Panel
Replacement - Left Side
.
2.
1
Tail Lamp Bolt (Qty: 2)
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten
2.5 N·m (22 lb ft)
2
Tail Lamp Control Module with Bulb Assembly
Tip
Rotate the control module with bulbs counterclockwise and remove from the tail lamp housing.
3
Tail Lamp Assembly
Warning:
Refer to
Halogen Bulb Warning
in the Preface section.
Procedure
Using a blunt tool, tap gently on the tail lamp studs before attempting to remove the tail lamp assembly from the
lamp pocket.
1.
Pull the tail lamp assembly rearward.
2.
Disconnect the tail lamp control module with bulbs assembly electrical connector.
3.
S e c tion 04
BODY SY
S T
E
M
S
Lighting
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
