Callout
Component Name
1
Rear Side Door Inside Handle Bolt Finish Cap
Procedure
Pull handle back to remove cap. Use suitable tool to unsnap.
2
Rear Side Door Inside Handle Screw
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten
2.5 N·m (23 lb in)
3
Rear Side Door Pull Handle Screw
Tighten
2.5 N·m (23 lb in)
4
Rear Side Door Trim Clip (Qty: 5)
5
Rear Side Door Trim Assembly
Procedure
Pull upwards on the door lock retainer cable to disengage.
1.
Disconnect the electrical connectors.
2.
Interior Trim and Paneling
BODY HARDWARE AND TRIM
S e c t i on 02
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
