Note:
The recess (2) of the fine toothing in the universal joint have to align precisely with the recess (1) of the fine toothing on the
steering pinion. The bore in the universal joint have to align with the groove on the steering pinion (3).
Check alignment of fine toothing of universal joint and steering pinion.
18.
Install the lower intermediate steering shaft bolts and tighten to
34 N·m (26 lb ft)
.
19.
Adjust the front toe. Refer to
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
.
20.
Bleed the hydraulic steering system. Refer to
Power Steering System Bleeding
.
21.
Power Steering
STEERING
S e c tion 09
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
