Callout
Component Name
Preliminary Procedure
Remove the front wheelhouse liner. Refer to
Front Wheelhouse Liner Replacement
.
1
Front Side Door
Caution:
Refer to
Fastener Caution
in the Preface section.
Procedure
Loosen the front side door hinge bolt (Qty: 4) to adjust the front side door.
1.
Adjust the front side door in order to obtain an even gap between the front side door and the roof, the rear door,
the rocker panel and the front fender and so that the front side door is flush with the roof, the rear door, the rocker
panel and the front fender.
2.
Adjustment
• Front side door to roof (a) 6.0 mm ± 1.0 mm (0.24 in ± 0.04 in)
• Front side door to rear door (b) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)
• Front side door to rocker panel (c) 4.5 mm ± 1.0 mm (0.18 in ± 0.04 in)
• Front side door to front fender (d) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)
Tighten
25 N·m (19 lb ft)
Bolted Exterior Body Panels and Closures
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
