Warning:
Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be
OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or
equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or
damage to the vehicle or its components.
For Vehicles equipped with OnStar® (UE1) with Back Up Battery: The Back Up Battery is a redundant power supply to allow limited
OnStar® functionality in the event of a main vehicle battery power disruption to the VCIM (OnStar®module). Do not disconnect the main
vehicle battery or remove the OnStar® fuse with the ignition key in any position other than OFF. Retained accessory power (RAP) should
be allowed to time out or be disabled (simply opening the driver door should disable RAP) before disconnecting power. Disconnecting power
to the OnStar® module in any way while the ignition is On or with RAP activated may cause activation of the OnStar® Back-Up Battery
(BUB) system and will discharge and permanently damage the back-up battery. Once the Back-Up Battery is activated it will stay on until it
has completely discharged. The BUB is not rechargeable and once activated the BUB must be replaced.
PREFACE
S e c tion 00
Caution Notices
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
