Position and set hydraulic lifter in connection with
CH-904
frame and
CH-49289-50
adapter (2) onto suspension frame (1). Pull
away front engine compartment cover slightly..
15.
Lower suspension frame max.
55 mm
.
16.
Remove the 4 front stabilizer shaft insulator clam bolts (1).
17.
Remove the stabilizer shaft.
18.
Installation Procedure
Install the stabilizer shaft.
1.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the 4 front stabilizer shaft insulator clam bolts (1) and tighten to
22 N·m (17 lb ft) plus 30 degrees
.
2.
Move out the positioning pins (1) of
CH 49289
adapter .
3.
Front Suspension
SUSPENSION
S e c tion 10
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
