Installation Procedure
Create 8 x 14 mm (5/16 x 15/16 in) slots for MIG-Brazing along the edges of the drivetrain and front suspension frame front support
as noted from the original panel.
1.
Clean and prepare the attaching surfaces for brazing.
2.
Position the drivetrain and front suspension frame front support on the vehicle.
3.
Verify the fit of the drivetrain and front suspension frame front support.
4.
Clamp the drivetrain and front suspension frame front support into position.
5.
Braze accordingly.
6.
Collision Repair
BODY REPAIR
S e c tion 03
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
