Callout
Component Name
Warning:
Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish
trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.
Caution:
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If
tether or curtain airbag are damaged in any way, they must be replaced.
Caution:
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the
head curtain inflator module is damaged in any way, it must be replaced.
Preliminary Procedure
Disable the SIR system. Refer to
SIR Disabling and Enabling
1.
Remove the sunshade supports. Refer to
Sunshade Support Replacement
2.
Remove the roof console. Refer to
Roof Console Replacement
3.
Remove the windshield outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacemen
t
4.
Remove the assist handles. Refer to
Assist Handle Replacement
5.
Remove the windshield garnish moldings. Refer to
Windshield Garnish Molding Replacement
6.
Remove the center pillar upper garnish moldings. Refer to
Center Pillar Upper Garnish Molding Replacement
7.
Remove the quarter window garnish moldings. Refer to
Quarter Window Garnish Molding Replacement
8.
Move the front seat fully forward and recline.
9.
1
Headliner Trim Panel Retainer (Qty: 3)
2
Headliner Trim Panel Assembly
Procedure
Disconnect the electrical connectors.
Floor Coverings and Headlinings
BODY HARDWARE AND TRIM
S e c t i on 02
BACK TO CHAPTER INDEX
CHEVROLET CRUZE BODY REPAIR MANUAL 2010
TO MODEL INDEX
