Canon imageRUNNER 1025 Basic Operation Manual Download

Page: 29 / 327

xxviii

Laser Saf

Laser Safety

This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product under the U.S.

Department of Health and Human Services (DHHS) Radiation Performance Standard according to the

Radiation Control for Health and Safety Act of 1968. This means that the machine does not produce hazardous

radiation.

Since radiation emitted inside the machine is completely confi ned within protective housings and external

covers, the laser beam cannot escape from the machine during any phase of user operation.

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration

implemented regulations for laser products on August 2, 1976. These regulations apply to laser products

manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.

Use of controls, adjustments, or performance of procedures other than those specifi ed in this manual may result in hazardous radiation
exposure.

The label is attached to the laser scanner machine inside the machine and is not in a user access area.

Summary of Contents for imageRUNNER 1025








































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 1025

Reviews:

Related manuals for imageRUNNER 1025

Brands by name

Popular brands

Canon imageRUNNER 1025, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER 1025

Reviews:

Related manuals for imageRUNNER 1025

Brands by name

Popular brands