Canon imageRUNNER 1025, Basic Operation Manual

Page: 67 / 327

Reg
ist
ering Destinations in the A
ddr
ess Book (imageRUNNER 1025iF Only)
3-4
Storing/Editing One-Touch Keys
11 11
Press [ ] or [ ] to select <ON>, then
press [OK].
O N
O P T I O N A L S E T T I N G
12 12
Confi rm that <ECM> is displayed, then
press [OK].
1 . E C M
O P T I O N A L S E T T I N G
13 13
Press [ ] or [ ] to select <ON> to
reduce system and line errors while
sending to or receiving from other
machines that support ECM, then press
[OK].
O N
E C M
14 14
Confi rm that <TX SPEED> is displayed,
then press [OK].
2 . T X S P E E D
O P T I O N A L S E T T I N G
15 15
Press [ ] or [ ] to select the sending
speed (33600 bps, 14400 bps, 9600 bps,
or 4800 bps), then press [OK].
3 3 6 0 0 b p s
T X S P E E D
If transmission errors occur frequently, lower the
speed.
16 16
Confi rm that <INTERNATIONAL> is
displayed, then press [OK].
3 . I N T E R N A T I O N A L
O P T I O N A L S E T T I N G
17 17
Press [ ] or [ ] to select the most
eff ective transmission option, then press
[OK].
D O M E S T I C
I N T E R N A T I O N A L
<DOMESTIC>: Normally select this option.
<LONG DISTANCE 1-3>: Select one of these
options when you make an international call.
If errors occur during fax transmissions, try the
setting from <LONG DISTANCE 1> through
<LONG DISTANCE 3>.
To register another one-touch key, repeat the
procedure from step 4.
18 18
Press [Stop] to return to the standby
mode.
–
–
–