manualshive.com logo in svg

Canon imageRUNNER 1025, Basic Operation Manual, Page: 51 / 327

Share
Download
Canon imageRUNNER 1025 Basic Operation Manual Download Page 51

Orig

inals and P

rint M

edia

2-4

 

 

          Placing Originals  

Placing Originals  

 Place your originals on the platen glass or into the ADF, depending on the size and type of 

the original, and the copy modes that you want to use. 

    On the Platen Glass 

On the Platen Glass 

 1

 

Lift up the ADF/platen glass cover. 

 

 

 2

 

Place your original face down. 

 

 

 3

 

Align the original with the appropriate 
paper size marks. 

 

 

 If your original does not match any of the paper 
size marks, align the center of your original with 
the arrow mark. 

 4

 

Gently lower the ADF/platen glass cover. 

 

 

 The original is ready for scanning. 

When closing the ADF/platen glass cover, be 
careful not to get your fi ngers caught, as this 
may result in personal injury.
Do not press down the ADF/platen glass cover 
forcefully, as this may damage the platen glass 
and cause personal injury.

–

–

Remove the original from the platen glass when 
scanning is complete.

Summary of Contents for imageRUNNER 1025








































































































































































































































































































































Reviews:

No comments