Canon imageRUNNER 1025, Basic Operation Manual

Page: 116 / 327

C
op
ying
4-29
Erasing Shadows/Lines
Book Frame Erase Book Frame Erase
This mode erases the dark borders and the center and contour lines that appear when you copy facing pages
in a book or bound original onto a single sheet of paper.
The Book Frame Erase mode cannot be used with the 2 on 1 mode.
You must place an original on the platen glass when using this function. –
–
1
Set an original on the platen glass.
For details, see “Placing Originals,” on p. 2-4.
2
Press [COPY].
3
Press [Frame Erase].
4
Press [ ] or [ ] to select <BOOK
FRAME>, then press [OK].
B O O K F R A M E
F R A M E E R A S E
5
Press [ ] or [ ] to select the book
size, then press [OK].
L T R
F A C I N G - P A G E S I Z E
6
Press [ ] or [ ] to set the book frame
erase width for all four borders, then
press [OK].
1 / 8 "
A L L F R . S A M E W D
The book frame erase width ranges 1/16" to 1
15/16" (1 to 50 mm).
7
Press [ ] or [ ] to set the book frame
erase width for the center of the book,
then press [OK].
3 / 8 "
E R A S E W I D T H C N T R
The width ranges 1/16" to 1 15/16" (1 to 50 mm).
8
Enter the desired copy quantity (1 to 99)
using – [numeric keys].
A T E X T
1 0 0 % * L T R
0 1
9
Press [Start].
If you want to copy multiple originals using the
platen glass, set an original and press [Start]
for each original, once for each page.
To cancel all settings, press [Reset].