Canon imagePROGRAF iPF8400S, User Manual

Page: 957 / 1004

Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause , the type of paper loaded
does not match the type specified in the printer
driver.
2.
Replace the loaded paper with paper of the type and size you have specified in the
printer driver.
(See "Loading and Printing on Rolls.")
➔
P.22
(See "Loading and Printing on Sheets.")
➔
P.25
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
You tried to print a test pattern for printer adjust-
ment on several sheets, but sheets of different
types of paper were used. When printing a test pattern for adjustment, use sheets of the same type of paper, in the
required quantity. Replace the paper as follows and perform adjustment again.
1. Lift the Release Lever and stop printing.
2.
Replace the paper.
(See "Loading and Printing on Sheets.")
➔
P.25
3.
Execute adjustment again from the control panel menu.
When Detect Mismatch in the Control Panel
menu is set to Warning , the type of paper loa-
ded does not match the type specified in the
printer driver.
You can continue to print, but note that this error may cause paper jams or problems in the
printing results.
The paper is too small.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause , paper smaller than the size
specified in the printer driver is loaded.
Press ▲ or ▼ to select Print , and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the printer as
follows.
1.
Press ▲ or ▼ to select Stop Printing , and then press the OK button.
2.
Change the paper size setting in the printer driver to the size loaded in the printer and
try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the printer
driver as follows.
1.
Press ▲ or ▼ to select Change Paper , and then press the OK button to stop printing.
2. Replace the loaded paper to match the settings in the printer driver and try printing
again.
(See "Loading and Printing on Rolls.")
➔
P.22
(See "Loading and Printing on Sheets.")
➔
P.25
When Detect Mismatch in the Control Panel
menu is set to Warning , paper smaller than the
size specified in the printer driver is loaded.
You can continue to print, but note that this error may cause problems in the printing re-
sults.
The paper is too small. The paper is too small.
" Replace paper with A4/LTR (vertical) or larger "
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet
or other printer status information.) Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper , press the OK button, and remove the paper.
(See "Removing Sheets.")
➔
P.539
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
➔
P.25
The printer will resume printing.
iPF8400S
The paper is too small.
User's Guide
Error Message
Messages regarding paper
957