Canon imagePROGRAF iPF8400S, User Manual

Page: 105 / 1004

4
Make your selection in the
E
Print Target list.
5
Make your selection in the
F
Print Quality list.
6
Access the Page Setup pane.
7
Select and click a roll paper in the
A
Paper Source list.
8
Select the paper width of the roll loaded in the printer for
B
Roll Width . In this case, 16 in. (406.4mm) is selec-
ted.
9
In
C
Page Size , make sure 100*500 is displayed, as registered in Page Setup .
10
Select the
D
Enlarged/Reduced Printing check box.
11
Click
F
Fit Roll Paper Width .
12
Confirm the print settings, and click
M
Print to start printing.
Note
• For tips on confirming print settings,
see "Confirming Print Settings ."
➔
P.349
Printing on Non-Standard Paper Sizes
Printing on Non-Standard Paper Sizes
For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set up
to 18.0 m.
Note
•
In Windows, although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m. The setting of
Custom Size is disabled when you exit the application software.
For instructions on specifying non-standard paper sizes for printing, refer to the following topics, as appropriate for your
computer and operating system.
•
Printing on Non-Standard Paper Sizes (Windows)
➔
P.105
•
Printing on Non-Standard Paper Sizes (Mac OS)
➔
P.109
Printing on Non-Standard Paper Sizes (Windows)
Printing on Non-Standard Paper Sizes (Windows)
For printing on non-standard size paper, first register the paper size in the printer driver.
Call a non-standard paper size registered in the printer driver with Custom Paper Size.
iPF8400S
Printing on Non-Standard Paper Sizes
User's Guide
Enhanced Printing Options
Printing banners or at other non-standard sizes
105