7
Remove the printed document from the media take-up unit.
(See "Removing Printed Documents from the Media
Take-up Unit (Optional).")
➔
P.557
(Optional)
8
Disable roll take-up.
(See "Disabling Roll Take-Up.")
➔
P.549
Important
•
The Media Take-up Unit cannot be used with sheets.
•
If you have attached the Output Stacker, always stow it before using the Media Take-up Unit.
(See "Storing the Output Stack-
er.")
➔
P.546
•
Position the Basket Cloth and Basket Rod so they do not interfere with the Media Take-up Sensor. This may impair opera-
tion.
(See "Storing the Output Stacker.")
➔
P.546
•
Rolls are not cut automatically when the Media Take-up Unit is used, regardless of the
Cutting Mode
setting in the printer
menu or the
Automatic Cutting
setting in the printer driver. However, you can cut paper by pressing the
Cut
button.
•
Color tones after printing may change during the ink drying period for some types of paper. Allow ample drying time before
the final check of colors, and do not remove printed documents from the Media Take-up Unit too soon.
•
In humid environments, documents printed using plenty of ink on relatively insubstantial media such as lightweight
Canon
Coated Paper
may not be retracted evenly by the unit. In this case, take steps to control humidity in the operating environ-
ment, or adjust the
Roll DryingTime
setting so that printed documents are retracted after the ink has fully dried.
•
In humid environments, documents printed on
Fabric Banner
or
Adhesive Synthetic Paper
may not be retracted evenly by
the unit. In this case, take steps to control humidity in the operating environment, or adjust the
Roll DryingTime
setting so
that printed documents are retracted after the ink has fully dried.
Enabling Roll Take-Up
Enabling Roll Take-Up
1
On the
Tab Selection screen
of the Control Panel, press
◀
or
▶
to se-
lect the Settings/Adj. tab (
).
Note
•
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2
Press the
OK
button.
The
Set./Adj. Menu
is displayed.
3
Press
▲
or
▼
to select
Take-up Reel
, and then press the
OK
button.
4
Press
▲
or
▼
to select
Use Take-up Reel
, and then press the
OK
button.
5
Press
▲
or
▼
to select
Enable
, and then press the
OK
button.
Disabling Roll Take-Up
Disabling Roll Take-Up
1
Press the
Cut
button.
iPF8400S
Enabling Roll Take-Up
User's Guide
Handling and Use of Paper
Media take-up unit
549
Summary of Contents for imagePROGRAF iPF8400S
