Buffalo TeraStation 5010 TS51210RH, User Manual

Page: 90 / 211

Code Description Corrective Action Log Example
Code 11
The drive capacity of the
backup destination TeraStation
became full.
Delete unnecessary files and folders.
rsync error: error
in file IO (code 11)
at receiver.c(389)
[receiver=3.1.0]
Code 12
Could not communicate
between backup source and
destination TeraStations.
Verify that the Ethernet cable is
securely connected and that the hub
or other devices on the network are
turned on.
rsync error: error in
rsync protocol data
stream (code 12) at
io.c(515)
The settings of the TeraStation
were changed while the
backup job was running.
Do not change the settings while the
backup job is running. If changed, the
connection is temporarily terminated
and the backup job will fail.
Code 14
Code 22
Insufficient memory on the
TeraStation was not enough
so that the backup job did not
run.
Reduce the number of backup
destination files or disable any other
functions running at the same time.
ERROR: out of
memory in flist_
expand
rsync error: error
allocating core
memory buffers
(code 22) at util.c(120)
[sender=2.6.8]
rsync: fork failed in
do_recv: Cannot
allocate memory (12)
rsync error: error
in IPC code (code
14) at main.c(655)
[receiver=2.6.8]
Code 20
The connection was
disconnected while the
backup job was running.
Do not change the settings while the
backup job is running. If changed, the
connection is temporarily terminated
and the backup job will fail. rsync error: received
SIGINT, SIGTERM, or
SIGHUP (code 20) at
rsync.c(242)
Code 23
Invalid characters were used in
the filename or folder name of
the backup destinations.
Change the filename or folder
name using compatible characters.
Available characters are described in
the "Adding a Shared Folder" section
in chapter 3.
rsync error: some
files could not be
transferred (code 23)
at main.c(702)
The backup destination files
were updated while the
backup job was running.
Do not overwrite the backup
destination files while the backup job
is running. If updated, the backup
destination files will not be backed up
and the backup job will fail.
89