Buffalo TeraStation 5010 TS51210RH User Manual Download Page 200

Page: 200 / 211

Close the front cover.

LCD Panel

The LCD panel can be cycled through different modes by pressing the display button on the front of the TeraStation.

Modes

LCD Message

Description

Corrective Action

LANx

Note:

The "x"

indicates the
number of the
LAN port where
the Ethernet cable
is connected.

LANx
Not Connected

Not connected to a network.

Connect an Ethernet
cable to the LAN
port.

LANx Half Duplex
10 Mbps

Connected at 10 Mbps half duplex.

LANx Full Duplex
10 Mbps

Connected at 10 Mbps full duplex.

LANx Half Duplex
100 Mbps

Connected at 100 Mbps half duplex.

LANx Full Duplex
100 Mbps

Connected at 100 Mbps full duplex.

LANx
1000 Mbps

Connected at 1000 Mbps.

LANx
2.5 Gbps

Connected at 2.5 Gbps.

LANx
5 Gbps

Connected at 5 Gbps.

LANx
10 Gbps

Connected at 10 Gbps.

LANx
Port Trunking

Displays if port trunking is configured.

Model Name/
Firmware Version

TS5410D
FW Version 1.00

Displays the model name and firmware
version of your model.

Note:

This example is using a TS5410DN unit.

The numbers and letters after "TS" may vary
depending on your model.

199

Summary of Contents for TeraStation 5010 TS51210RH




















































































































































































































Search results

Summary of Contents for TeraStation 5010 TS51210RH

Reviews:

Related manuals for TeraStation 5010 TS51210RH

Brands by name

Popular brands

Buffalo TeraStation 5010 TS51210RH, User Manual

Search results

Summary of Contents for TeraStation 5010 TS51210RH

Reviews:

Related manuals for TeraStation 5010 TS51210RH

Brands by name

Popular brands