Buffalo TeraStation 5010 TS51210RH, User Manual

Page: 75 / 211

4
Enable authentication, enter a target CHAP name and secret, and click OK .
Note: To enable mutual authentication, select the "Enable" checkbox to the right of "Mutual Authentication"
and enter the initiator CHAP secret.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK .
6
Click OK , then Close .
Configuring access restrictions for each iSCSI volume is finished.
Connecting to Individual Volumes that Are Access-Restricted
1
Open the Microsoft iSCSI Initiator.
2
Register the initiator CHAP secret to your computer first. If you didn't enable mutual authentication, skip this
step.
Click
CHAP in the "Configuration" tab. In the "Initiator CHAP secret" field, enter the configured initiator CHAP
secret and click OK .
3
In the "Discovery" tab, click Discover Portal .
4
Enter the TeraStation's IP address in the "IP address or DNS name" field.
5
Click Advanced .
6
Select the "Enable CHAP log on" checkbox and enter the target CHAP name into the "Name" field and the
target CHAP secret into the "Target secret" field.
If mutual authentication is enabled, select the "Perform mutual authentication" checkbox.
7
Click OK twice.
74