manualshive.com logo in svg

Buffalo TeraStation 5010 TS51210RH, User Manual, Page: 92 / 211

Share
Download
Buffalo TeraStation 5010 TS51210RH User Manual Download Page 92

Code

Description

Corrective Action

Log Example

B105

The drives were not 
recognized.

Verify that the drives are recognized 
properly from Settings. If you 
configure the "usbdisk" folders for 
the backup source or destinations, 
confirm if these folders exist in the 
shared folder list.

-

B106

The file systems of the USB 
drive are not supported.

Verify that the USB drive is formatted 
to the compatible file systems. If you 
configure the management backup in 
the backup job, FAT format cannot be 
used for the backup destination.

-

B107

The device files such as "/dev/
null" etc. does not exist.

Restart the TeraStation and try again.

-

B108

Credentials to access a shared 
folder on the rsync-compatible 
NAS device were not found.

Try adding the rsync-compatible NAS 
device from the server list again.

-

Replication

Replication copies all data from a share to a share on a different TeraStation. This is an easy way to configure a 
reliable system to provide data protection in the event your main TeraStation fails. To configure replication, connect 
an Ethernet cable to the LAN port of each TeraStation and follow the procedure below.

Notes: 

•  For best results, use static IP addresses and a 10GbE port for connecting both replication TeraStations (source and 

destination).

•  Replication source data is copied to the replication destination folder with a differential overwrite. Any data that 

is not in the replication source will be overwritten.

Preparing a Replication Destination

First, configure a folder as a replication destination.

1 

In Settings, click 

File Sharing

.

2 

Click 

 to the right of "Folder Setup".

3 

Choose the folder to set as a replication destination.

4 

Under "LAN Protocol Support", select the "Backup" checkbox on the "Basic" tab.

91

Summary of Contents for TeraStation 5010 TS51210RH




















































































































































































































Reviews:

No comments