manualshive.com logo in svg

Buffalo TeraStation 5010 TS51210RH, User Manual, Page: 79 / 211

Share
Download
Buffalo TeraStation 5010 TS51210RH User Manual Download Page 79

Chapter 5 Backup

Backing Up to the TeraStation

You can back up TeraStation folders to:

•  A different folder on the TeraStation
•  Another LinkStation on the network
•  Another TeraStation on the network
•  A USB drive connected on the TeraStation

*

* To back up the subfolders' access restriction settings, the USB drive should be formatted by ext3 or XFS.

You can also configure backup jobs from Easy Admin.

Note: 

For best results, using a 10GbE port to connect a backup device is recommended.

Preparing a Backup Destination

First, configure a folder as a backup destination.

1 

In Settings, click 

File Sharing

.

2 

Click 

 to the right of "Folder Setup".

3 

Choose the folder to set as a backup destination.

4 

Under "LAN Protocol Support", select the "Backup" checkbox on the "Basic" tab.

78

Summary of Contents for TeraStation 5010 TS51210RH




















































































































































































































Reviews:

No comments