Buffalo TeraStation 5010 TS51210RH, User Manual

Page: 74 / 211

1
Open the Microsoft iSCSI Initiator.
2
Register the initiator CHAP secret to your computer first. If you didn't enable mutual authentication, skip this
step.
Click
CHAP in the "Configuration" tab. In the "Initiator CHAP secret" field, enter the configured initiator CHAP
secret and click OK .
3
In the "Discovery" tab, click Discover Portal .
4
Enter the TeraStation's IP address in the "IP address or DNS name" field.
5
Click Advanced .
6
Select the "Enable CHAP log on" checkbox and enter the target CHAP name into the "Name" field and the
target CHAP secret into the "Target secret" field.
If mutual authentication is enabled, select the "Perform mutual authentication" checkbox.
7
Click OK twice.
8
In the "Targets" tab, select the volume from "Discovered targets" and click Connect - OK .
9
If the status of the selected volume is displayed as "Connected" under "Discovered targets", the connection is
established properly.
Accessing the volume on the access-restricted TeraStation is finished.
Configuring Access Restrictions for Individual Volumes
If access restrictions are configured for a volume, that volume cannot be accessed unless the target CHAP name and
secret are authenticated.
1
In Settings, click Storage .
2
Click to the right of "iSCSI".
3
Click the volume to enable access restrictions.
73