Brother PE-DESIGN Instruction Manual Download Page 33

Page: 33 / 274

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

Click on the outline of the pattern to apply the settings (color and stitch type) to the outlines.
Your image now looks like this:

If you think that the outline is still too thick, you can change it now.

To change the width of the outline: Click on the outline using the mouse’s right button.
The

Sewing Attribute Setting

dialog displays.

Proceed in the same way as described in point 4 to change the Zigzag width from 1.5 mm to
1 mm.

Click on the outlines to apply the new setting.
Your image now looks like this:

■

Setting the regions

Click

on the Tool Box.

The shape of the cursor changes to

and is displayed together with a small rectangle.

The Sewing Attributes bar now looks like this:

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands