Brother PE-DESIGN Instruction Manual Download Page 206

Page: 206 / 274

198

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

If text made from multiple TrueType fonts is selected, the list of characters displayed is for the font
of the first letter of the text.

See also:

“Entering text” on page 127

■

Text Attribute Setting

Purpose:

Allows for precise control of character attributes.

Shortcut key:

Toolbar:

Operation:

Select one or more text patterns.

Click

Text

, then

Text Attribute Setting

The

Text Attribute Setting

dialog displays.

◆

Enter the desired values for each set-
ting.

◆

To restore the default value of an indi-
vidual setting, click its

Default

button.

◆

Click

Apply

to confirm the effect of the

setting.

◆

Click

Close

to remove the dialog.

Kerning

Sets the spacing between individual char-
acters.
Range: -100 - 100 mm (-3.94 - 3.94 inches)
Default: 0

0.0 mm

5.0 mm (between
“A” and “b”)

Vertical Offset

Moves the text vertically.
Range: -100 - 100 mm (-3.94 - 3.94 inches)
Default: 0

0.0 mm

2.0 mm

Rotate angle

Rotates the characters.
Range: 0 - 359 degrees
Default: 0

0 degree

20 degree

Character
Spacing

Sets the spacing between all characters.
Range: -100 - 100 mm (-3.94 - 3.94 inches)
Default: 0

0.0 mm

2.0 mm

Line Spacing

Sets the spacing between lines in percents
of the character height.
Range: 0 – 1000%
Default: 0

100%

150%

Ctrl

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands