manualshive.com logo in svg

Brother PE-DESIGN, Instruction Manual

The Brother PE-DESIGN's Instruction Manual is an essential tool for users seeking guidance on maximizing the potential of their embroidery machine. With our user-friendly manual available for free download at manualshive.com, you can easily access detailed instructions and unleash your creativity with this innovative product.

Share
Download
background image

160

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

4

From the Available patterns list, click the pattern that you want to write to the card. The highlighted 
pattern is selected.

Then, click 

 to add the selected pattern to the Selected patterns list.

5

Continue this operation for all patterns that you wish to write to an original card. Viewing the Card 
capacity indicator during this process will allow you to plan which designs you would like to save 
an original card.

Reading the Card capacity indicator:

The part indicating selected patterns is shown in blue, and the part indicating the pattern being 
selected is shown in light blue.
If the part indicating the pattern being selected appears in red, the size of the selected patterns 
has exceeded the capacity of an original card.

6

After the patterns to be written to the card are selected, click 

 to write the data to the card. The 

data is written to an original card after all data already on the card is erased.

After a short while, the data is finished writing to an original card. Now, the card containing the 
data can be used with the embroidery machine.

•

If there are any patterns on the card that you do not wish to erase, be sure to select the card in the 
Folder dialog box, and then add the patterns to the Selected patterns list.

•

Do not remove the card or unplug the USB cable while data is being written to the card (while the LED 
indicator is flashing).

Summary of Contents for PE-DESIGN



















































































































































































































































































Reviews:

No comments

Related manuals for PE-DESIGN

MACROMEDIA FLASH 8-FLASH Tutorials Manual preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 292
MACROMEDIA BREEZE 5 Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 26
MACROMEDIA BREEZE Installation Manual preview
BREEZE
Brand: MACROMEDIA Pages: 32
MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
Califone AV Tutor MCFBV1-D Specification preview
AV Tutor MCFBV1-D
Brand: Califone Pages: 1
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Brand: F-SECURE Pages: 90
MACROMEDIA COLDFUSION STUDIO 4.5-USING COLDFUSION... Use Manual preview
COLDFUSION STUDIO 4.5-USING COLDFUSION...
Brand: MACROMEDIA Pages: 236
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Brand: KAPERSKY Pages: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Brand: Red Hat Pages: 110
Siemens OC130S Installation Instructions Manual preview
OC130S
Brand: Siemens Pages: 11
Siemens ID Mouse V 3.1 User Manual preview
ID Mouse V 3.1
Brand: Siemens Pages: 28
Siemens ROS User Manual preview
ROS
Brand: Siemens Pages: 32
Siemens OpenScape Xpressions PhoneMail User Manual preview
OpenScape Xpressions PhoneMail
Brand: Siemens Pages: 110
Native Instruments Scarbee Clavinet & Piano User Manual preview
Scarbee Clavinet & Piano
Brand: Native Instruments Pages: 24
Konica Minolta COLIBRI Brochure preview
COLIBRI
Brand: Konica Minolta Pages: 6
3Com 3C19250 - USB Ethernet Network Interface Card User Manual preview
3C19250 - USB Ethernet Network Interface Card
Brand: 3Com Pages: 16
Xerox DocuColor 2045 Color Management Manual preview
DocuColor 2045
Brand: Xerox Pages: 60
MACROMEDIA FLASH MEDIA SERVER 2-SERVER MANAGEMENT ACTIONSCRIPT... Reference preview
FLASH MEDIA SERVER 2-SERVER MANAGEMENT ACTIONSCRIPT...
Brand: MACROMEDIA Pages: 74

Brands by name

Popular brands

Load more brands