manualshive.com logo in svg

Brother PE-DESIGN, Instruction Manual

The Brother PE-DESIGN's Instruction Manual is an essential tool for users seeking guidance on maximizing the potential of their embroidery machine. With our user-friendly manual available for free download at manualshive.com, you can easily access detailed instructions and unleash your creativity with this innovative product.

Share
Download
background image

128

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

(If a TrueType Font is selected)
If a TrueType Font is selected, a dialog similar to the one shown below will appear.

Based on the set attributes, all characters for the selected font appear in the 

Insert Character

 chart.

Enter characters in the same way that you would enter characters with a built-in font (as explained 
above).

NOTE:

With some TrueType fonts, the text cannot be converted correctly into embroidery data due to the 
shape of the design or the text cannot be embroidered correctly. Before sewing your project, 
embroider a trial piece of fabric. In addition, text of some TrueType fonts cannot be converted. In 
this case, the area containing the converted text will be empty or a message warning that the text 
cannot be converted will appear.

NOTE:

If you need to edit the entered text, you can do so in the 

Edit Text

 dialog which opens when you 

execute the 

Text – Edit Text Letters

 command. See “Edit Text Letters” on page 197.

Circle and Arc Drawing Mode

The circle or arc drawing mode allows you to create several patterns related to the circle: normal circles 
(or ellipses), arcs, fan shapes and arc & strings. 

All these patterns, except arcs have an outline and a region inside can independently be assigned differ-
ent sewing attributes. Arcs are simple outlines.
Note that you have to decide which pattern type you want to draw before drawing it. You cannot, for 
example, draw a normal circle and change it into an arc afterwards.

Circle

Ellipse

Arc

Fan shape

Arc & string

Summary of Contents for PE-DESIGN



















































































































































































































































































Reviews:

No comments

Related manuals for PE-DESIGN

DAVIS WeatherLink Addendum preview
WeatherLink
Brand: DAVIS Pages: 20
Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Brand: Xerox Pages: 100
Sony Ericsson Controller Mode Application Note preview
Controller Mode
Brand: Sony Ericsson Pages: 10
Red Hat ENTERPRISE VIRTUALIZATION FOR DESKTOPS Solution Manual preview
ENTERPRISE VIRTUALIZATION FOR DESKTOPS
Brand: Red Hat Pages: 14
ShoreTel ShoreWare User Manual preview
ShoreWare
Brand: ShoreTel Pages: 25
McAfee WEBSHIELD SMTP Datasheet preview
WEBSHIELD SMTP
Brand: McAfee Pages: 2
Brocade Communications Systems Brocade 8/12c Installation Manual preview
Brocade 8/12c
Brand: Brocade Communications Systems Pages: 47
Muratec TIFFMAKER User Manual preview
TIFFMAKER
Brand: Muratec Pages: 13
HP PROBOOK 4425S Specifications preview
PROBOOK 4425S
Brand: HP Pages: 4
Polycom CMA V4.0 User Manual preview
CMA V4.0
Brand: Polycom Pages: 23
Denon DP-200USB Brochure & Specs preview
DP-200USB
Brand: Denon Pages: 2
MGI PhotoSuite Manual preview
PhotoSuite
Brand: MGI Pages: 19
FieldServer FS-8700-54 Driver Manual preview
FS-8700-54
Brand: FieldServer Pages: 8
i3 International SRX PRO User Manual preview
SRX PRO
Brand: i3 International Pages: 220
CAERE WORDSCAN User Manual preview
WORDSCAN
Brand: CAERE Pages: 108
KAPERSKY SECURITY - FOR PDA 4.5 User Manual preview
SECURITY - FOR PDA 4.5
Brand: KAPERSKY Pages: 137
KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER... Administrator'S Manual preview
SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER...
Brand: KAPERSKY Pages: 185
UNIBLUE DISKRESCUE 2009 - V1 Manual preview
DISKRESCUE 2009 - V1
Brand: UNIBLUE Pages: 26

Brands by name

Popular brands

Load more brands