177
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable
Stitch Creator
Quick Reference
Alphabetic Index
Operation:
1
Check that the scanner or other device is correctly connected.
2
Click
Image
, then
Input
, then
from TWAIN device
.
The driver interface set in the
Select TWAIN device
dialog is displayed.
Operate that interface, make the settings for importing an image, and import the image.
NOTE:
For information on using the interface, see the help manual for that interface, or contact the manu-
facturers of the interface.
3
When the image transfer between the scanner (or other device) and the driver is complete, the
imported image will be pasted in Design Page.
If the current image is not saved, you will be asked whether you want to save it.
NOTE:
TWAIN is an application interface (API) standardization for software controlling scanners, etc.
Also, the software itself is called TWAIN.
This software supports TWAIN standardized devices, so you can control the scanner and import
the image directly.
Before using this function, you must go to the
Select TWAIN device
dialog to select a TWAIN device.
■
Input – from Portrait
Purpose:
Combine images of facial features that are built in to the program to create an
original portrait.
Shortcut key:
No shortcut key for this function
Toolbar:
No button for this function
Operation:
1
Click
Image
, then
Input
, then
from Portrait
.
A dialog similar to the one shown below appears.
◆
Click
OK
to save the image.
◆
Click
Cancel
to finish without saving the image.