Brother PE-DESIGN Instruction Manual Download Page 102

Page: 102 / 274

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

■

Rotate

Purpose:

Allows you to change the direction of the pattern.

Shortcut key:

Toolbar:

Operation:

Select one or more outline data (Stage 3 only).

Click

Edit

, then

Rotate

The handles around a selected pattern are replaced by smaller rectangle on the four corners of
the selected area.

To rotate a pattern, move the cursor on one of the four rotation handles.

The shape of the cursor changes to

as soon as your cursor touches a rotation handle. Click

a handle and a lined box appears around the selected pattern.
You can rotate the pattern clockwise or counterclockwise by dragging the mouse.

A simple dragging of the mouse will rotate the pattern by 1˚ increments. Pressing the

key

will rotate it by 15˚ increments.

See also:

“Rotating a pattern” on page 67

■

Numerical Setting-Size

Purpose:

Resizes the selection numerically.

Shortcut key:

No shortcut key for this function.

Toolbar:

No button for this function.

Operation:

Select one or more patterns. (Stage 3 only)

Click

Edit

, then

Numerical Setting

, then

Size

The

Size

dialog appears.

◆

To change the width and height propor-
tionally, check

aspect

◆

Select the units (% or mm/inch) for the
width and height.

◆

Either typing in a value or clicking the
arrows to select the desired value can
enter the width and height.
Select

100%

to leave the pattern

unchanged.
If

aspect

is selected, changing one

dimension automatically changes the
other so the proportion of the width and
height remains unchanged.

◆

Click

to confirm.

◆

Click

Preview

to view the pattern at the

new size in the Design Page.

◆

Click

Cancel

to exit without making any

changes.

Ctrl

Shift

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands