Brother PE-DESIGN Instruction Manual Download Page 27

Page: 27 / 274

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

Step 3

Converting to Line Image

Move to line image: Click

Stage

on the menu bar, then click

To Line Image

on the submenu. You can

also click the button of the Toolbar shown below:

NOTE:

Many menu functions can be activated by clicking a button on the Toolbar.

The

Cut out to Line Image

dialog will display. In this dialog, you will select the color(s) that will be

used to make the outline of the image.

When you click

, the line image displays.

◆

If necessary, scroll and zoom the image.

◆

Move the cursor over the image. Its shape

changes to

. Click on any point of the out-

line. The selected color displays in the upper

box under

Pick Colors

and a

appears in the

check box to show that the color is selected.

•

When the outline of the image uses more than one
color, you can repeat to select a total of five colors.
If you try to select more, colors are scrolled down,
and the color that was at the bottom is deselected.

•

If you selected a color by mistake, simply click
its check box to deselect it.

◆

Click

View

to see the effect of your selection.

•

If you wanted to select another choice of color,
click

Cancel

. The image displays again and you

can repeat this step with another color.

◆

If your preview image looks like the one shown
here, click

to confirm the outline of your pattern.

◆

Click

Cancel

to exit and go back to the image.

◆

If necessary, click

Image Tune

to reduce the col-

ors or the noise. (page 109)

•

At this stage, the data can be saved as a

*.pel

file.

To Line Image

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands