Brother PE-DESIGN Instruction Manual Download Page 167

Page: 167 / 274

159

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

•

Patterns created for the optional extra-large embroidery hoop are marked with the

symbol.

◆

The Selected patterns list [B] displays the patterns selected with

. The data will be written to an

original card in the order displayed.

◆

Click

to add the pattern selected in the Available patterns list to the Selected patterns list.

◆

Click

to write to an original card the patterns displayed in the Selected patterns list.

◆

Click

to remove the pattern selected in the Selected patterns list.

With the Hoop size selector, select the size of the embroidery hoop that can be used with your
embroidery machine.

NOTE:

Do not select a hoop size larger than the embroidery hoop that can be used with your embroidery
machine. Otherwise, the created card will not work correctly with the embroidery machine.

Click

. The Folder dialog appears. Select the folder where the pattern file (.pes) is saved, and

then click

Images and file names for the patterns files saved in the selected folder appear in the Available
patterns list.

•

If an original card was selected

, the patterns saved on the inserted card can be seen.

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands