manualshive.com logo in svg

Brother PE-DESIGN, Instruction Manual

The Brother PE-DESIGN's Instruction Manual is an essential tool for users seeking guidance on maximizing the potential of their embroidery machine. With our user-friendly manual available for free download at manualshive.com, you can easily access detailed instructions and unleash your creativity with this innovative product.

Share
Download
background image

69

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

4

Press the 

 key to remove the point from the outline.

Note that the points marked by red squares cannot be deleted.

Line Drawing Mode

The line drawing mode allows you to add broken lines to your pattern. A broken line is made of one or 
more contiguous straight lines, the ending point of a straight line being the starting point of the next one.
If the broken line you drew did not create enclosed regions, it remains a simple outline and you can only 
set sewing attributes for the line itself in Stage 4.
If the broken line did create enclosed regions, you can assign stitches and colors to both the outline and 
the regions in Stage 4.
If you draw a line through an existing region, creating two separate regions, you will be able to set sewing 
attributes to both separately, as well as to the separating line.

■

Drawing a broken line

1

Click 

 on the Tool Box.

The shape of the cursor changes to 

 and is displayed together with a small image of the tool 

button.

2

Draw the line.
Move the mouse to the starting point and click.
Move the mouse to the ending point of the first straight line and click again.

NOTE:

You can always remove the last-entered point by clicking the mouse’s right button.
If needed, use the grid to help you draw the lines. You can set the grid so that each of its vertical 
and horizontal lines are visible. For more information on the grid, refer to “Grid Setup” on page 
103.

3

Repeat until you arrive at the last end point. At that point double-click.

If the 

 key is held down while moving the mouse, only vertical or horizontal lines will be 

drawn.

Zoom-in Mode

The zoom-in mode is used to magnify a part of the outline so that you can check it and edit it more easily.

1

Click 

 on the Tool Box.

The shape of the cursor changes to 

.

2

Click on the area you want to enlarge or drag the cursor across the area that you want to enlarge, 
then release it. You can repeat this step several times.

Delete

Broken line without a region

Broken line with region

Starting point

Ending point

Broken lines with two regions

Shift

Summary of Contents for PE-DESIGN



















































































































































































































































































Reviews:

No comments

Related manuals for PE-DESIGN

Garmin GNC 420 Instructions Manual preview
GNC 420
Brand: Garmin Pages: 6
VMware vSphere 4 Architecture And Performance preview
vSphere 4
Brand: VMware Pages: 19
Tascam Portastudio iPad Application User Manual preview
Portastudio iPad Application
Brand: Tascam Pages: 5
MACROMEDIA FIREWORKS 2-USING FIREWORKS Use Manual preview
FIREWORKS 2-USING FIREWORKS
Brand: MACROMEDIA Pages: 20
F-SECURE MOBILE SECURITY 2010 FOR ANDROID Manual preview
MOBILE SECURITY 2010 FOR ANDROID
Brand: F-SECURE Pages: 20
Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual preview
ETERNUS VSS Hardware Provider 2.1
Brand: Fujitsu Pages: 134
Fujitsu ATLAS V14 User Manual preview
ATLAS V14
Brand: Fujitsu Pages: 302
Fujitsu PFU Rack2-Filer User Manual preview
PFU Rack2-Filer
Brand: Fujitsu Pages: 463
Fujitsu Eternus web GUI User Manual preview
Eternus web GUI
Brand: Fujitsu Pages: 635
Fujitsu ETERNUS User Manual preview
ETERNUS
Brand: Fujitsu Pages: 64
Novell CLIENT LOGIN EXTENSION 3.7 - ADMINISTRATION Administration Manual preview
CLIENT LOGIN EXTENSION 3.7 - ADMINISTRATION
Brand: Novell Pages: 32
Novell APPARMOR 2.0.1 Administration Manual preview
APPARMOR 2.0.1
Brand: Novell Pages: 142
Draytek Smart Monitor User Manual preview
Smart Monitor
Brand: Draytek Pages: 73
AppsDaily C2 User Manual preview
C2
Brand: AppsDaily Pages: 38
GRASS VALLEY GV Browse User Manual preview
GV Browse
Brand: GRASS VALLEY Pages: 24
Olympus 141670 - DS 330 Digital Voice Recorder Instructions Manual preview
141670 - DS 330 Digital Voice Recorder
Brand: Olympus Pages: 76
MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION... Manual preview
COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...
Brand: MACROMEDIA Pages: 168
TANDBERG MOVI 4.0 - ADMINISTRATOR GUIDE 09-2010 Administrator'S Manual preview
MOVI 4.0 - ADMINISTRATOR GUIDE 09-2010
Brand: TANDBERG Pages: 22

Brands by name

Popular brands

Load more brands