Brother PE-DESIGN Instruction Manual Download Page 253

Page: 253 / 274

245

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

■

Cut

Purpose:

Removes the selected line(s) from the screen while saving a copy in the clipboard.

Shortcut key:

Toolbar:

Operation:

Select one or more lines.

Click

Edit

, then

Cut

The selected lines disappear. Since they are saved in the clipboard, you can paste them back
using

Edit - Paste

See also:

“Copy”, “Paste” below, “Delete” on page 246

■

Copy

Purpose:

Saves the selected line(s) in the clipboard without removing them from the screen.

Shortcut key:

Toolbar:

Operation:

Select one or more lines.

Click

Edit

, then

Copy

The patterns are copied into the clipboard and are ready to be pasted.

See also:

“Cut” above, “Duplicate” and “Paste” below

■

Duplicate

Purpose:

Makes a copy of the selected line(s).

Shortcut key:

Toolbar:

No button for this function

Operation:

Select one or more lines.

Click

Edit

, then

Duplicate

A copy of the lines appears on the screen.

See also:

“Copy” above and “Paste” below

■

Paste

Purpose:

Pastes the lines of the clipboard on the screen.

Shortcut key:

Toolbar:

Operation:

Click

Edit

, then

Paste

The lines saved in the clipboard (using

Cut

Copy

) are pasted on the screen.

See also:

“Cut”, “Copy” and “Duplicate” above

Ctrl

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands