Brother PE-DESIGN Instruction Manual Download Page 164

Page: 164 / 274

156

Contents

Before Using

Getting Started

Design Center

Layout & Editing

Programmable

Stitch Creator

Quick Reference

Alphabetic Index

■

Save

Purpose:

Saves your Design Page on the disk as a latest version file (default).

Shortcut key:

Toolbar:

Operation:

Click

File

, then

Save

If the file already exists on the disk (the file has been saved at least once), the file is saved imme-
diately.

If the file name is still

Untitled

or if, for any other reason, the file cannot be found on the disk, the

application automatically switches to

Save As

See also:

“Save As” below, “Write to Card – Current Design” on page 157

■

Save As

Purpose:

Saves your Design Page on the disk under a new file name.

NOTE:

If you select a previous version, saved

*.pes

files can be opened with a previous

version of the software. However, all saved data will be converted to stitch data.

Shortcut key:

No shortcut key for this function

Toolbar:

No button for this function

Operation:

Click

File

, then

Save

File Save As

dialog similar to this will display.

If the new file name already exists, this message will appear:

The new file name displays in the title bar of the Layout & Editing window.

See also:

“Save” above and “Write to Card – Current Design” on page 157

◆

Select the drive, the folder and type the
file name.

◆

Click

Save

to save.

◆

Click

Cancel

to exit.

◆

Click

Yes

to overwrite.

◆

Click

if you do not want to overwrite

the existing file.

Ctrl

Summary of Contents for PE-DESIGN



















































































































































































































































































Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands

Brother PE-DESIGN, Instruction Manual

Search results

Summary of Contents for PE-DESIGN

Reviews:

Related manuals for PE-DESIGN

Brands by name

Popular brands