Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 97 / 969

DB-25 Connector Pin-outs
for the Teranex 2D
Teranex 2D has a pair of RCA inputs so you can connect 2 channels of analog audio for left and
right input, but there is also a DB-25 multi pin connector on the rear panel that lets you connect
up to 4 analog audio channels, both input and output.
Analog Audio Inputs/Outputs
When you select the ‘anlg’ button on the front panel as the audio input type, a menu page will
appear on the front panel LCD allowing you to choose which of the two analog audio sources
you want to use.
When using the DB-25 connector, an optional breakout cable is required, which is a standard
Yamaha format cable for balanced XLR connections. This inexpensive breakout cable may be
purchased through many vendors, or may be fabricated using off the shelf connectors and cable.
Teranex 2D Processor analog audio pin connections.
Analog
Audio Channel
Hot Pins (+) Cold Pins (–) Ground Pins
1 IN 1 14 10
2 IN 2 15 12
3 IN 3 16 13
4 IN 4 17 22
1 OUT 5 18 23
2 OUT 6 19 24
3 OUT 7 20 25
4 OUT 8 21 25
13 12 10 8 7 6 5 4 3 2 1
25 24 23 22 21 20 19 18 17 16 15 14
DB-25 pin outs also compatible with Yamaha™, Mackie™,
Sony™ and Apogee™ connectors.
97 97 DB25 Connector Pin-outs for the Teranex 2D