Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 110 / 969

Please note: AudioInPair0: refers to input pair 1, AudioInPair1: refers to input pair 2, etc.
Command Command Description
AudioInPair0: Select source to be mapped to input pair 1
AudioInPair1: Select source to be mapped to input pair 2
AudioInPair2: Select source to be mapped to input pair 3
AudioInPair3: Select source to be mapped to input pair 4
AudioInPair4: Select source to be mapped to input pair 5
AudioInPair5: Select source to be mapped to input pair 6
AudioInPair6: Select source to be mapped to input pair 7
AudioInPair7: Select source to be mapped to input pair 8
Metadata Commands for Teranex 3D
Available source values are:
Command Command Description
Metadata channel mode: Values are: 32 (3/2 (L,C,R,Ls,Rs)), 20 (2/0 (L/R))
Metadata lfe select: Enables LFE. False=OFF; True=ON
Genlock
Command Command Description
Gen reference: For Teranex AV only. Select the Reference Output signal.
The type of output allowed is dependent on the currently
selected output format, the values are: Blackburst, TriLevel.
Line offset: Set line timing adjustment for external genlock.
Values are within the range set by the current output video
format. (Default = 1)
Pixel offset: Set pixel timing adjustment for external genlock. Values are
within the range set by the current output video format.
(Default = 0)
Signal locked: Indicate genlock status. Cannot be changed by the end user.
True indicates that the Teranex processor is locked to the
external reference. False indicates that it is not locked.
Type: Select the Genlock (Reference) source for the device.
For Teranex 2D, 3D and Express, values are: Input, External.
For Teranex AV, values are: Input, External and Internal.
110 110 Developer Information