↵
ACK
↵
↵
MODE3D:
↵
3D roll left: 20
↵
3D roll right: 0
↵
↵
Command
Command Description
3D roll left:
Adjust the Left Eye Z axis image rotation.
Range is -400 to +400 units. (Default = 0)
50 units = 1 degree. (1 unit = 0.02 degree)
3D roll right:
Adjust the Right Eye Z axis image rotation.
Range is -400 to +400 units. (Default = 0)
50 units = 1 degree. (1 unit = 0.02 degree)
3D tilt left:
Adjust the Left Eye X axis image tilt.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
3D tilt right:
Adjust the Right Eye X axis image tilt.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
3D toeIn left:
Adjust the Left Eye Y axis image toe-in.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
3D toeIn right:
Adjust the Right Eye Y axis image toe-in.
Range is -40 to +40 units. (Default = 0)
5 units = 1 degree. (1 unit = 0.2 degree)
3D flip left:
Flip the Left Eye image. Values are:
Off, Horizontal, Vertical, Both
3D flip right:
Flip the Right Eye image. Values are:
Off, Horizontal, Vertical, Both
Network Config
Command
Command Description
Friendly name:
Displays the current user-defined name assigned
to the device. Command is used to assign a new name to the
device.
DHCP enabled:
Although not advised, user may enable/disable
DHCP. True = enabled; False = disabled
IP address:
Displays current IP address as an integer.
Cannot be changed by the user.
Gateway:
Displays current gateway as an integer.
Cannot be changed by the user.
Subnet:
Displays current subnet mask as an integer.
Cannot be changed by the user.
717
717
开发人员信息
Summary of Contents for Teranex 2D Processor
