Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 36 / 969

Adjust Aspect
To customize the aspect ratio size, position and trim settings, use the soft menu
buttons and rotary knob.
Size
The ‘size’ setting adjusts the horizontal and/or vertical image size.
The range is approximately -50 to +200 percent.
Position
Position allows you to move the input image within the output frame.
The range of adjustment is dependent on the current image size.
Trim
Trim masks the edges of your input image horizontally and/or vertically.
Horizontal
Used for horizontal sizing, positioning and trimming.
Vertical
Used for vertical sizing, positioning and trimming.
Both
Links horizontal and vertical controls together. For example, when changing
the input image size, linking both controls maintains the proper aspect ratio.
Reset All
Press to return all settings to their default values.
Aspect Fill
To define the color of the bars used in pillarbox and letterbox aspect ratios, adjust the
‘luminance’, and ‘cb’ and ‘cr’ chroma values using the rotary knob.
Zoom/Crop
Zoom/crop is used to mask potential video disturbances that may appear at the top,
bottom, left or right edges of your source image. This is performed by trimming your
conversion slightly. Turning zoom/crop on will instantly zoom the converted image
vertically by 3 lines and horizontally by 3 pixels, then crop the image by the same
amount. Zoom/crop will not effect your adjustable aspect ratio settings.
Position
0
Trim
Position
Size
Reset
All
Both
Vertical
Horizontal
Horizontal>Position
Size
0
Trim
Position
Size
Reset
All
Both
Vertical
Horizontal
Horizontal>Size
Trim
0
Trim
Position
Size
Reset
All
Both
Vertical
Horizontal
Horizontal>Trim
Zoom Crop
Zoom
Crop
Fill
On
Off
Adjust
Aspect
Aspect Menu>Zoom/Crop
Fill
64
Reset
All
Cr
Cb Luma
Aspect Fill>Luma
Aspect
Zoom
Crop
Fill
Adjust
Aspect
Aspect Menu>Aspect Fill
36 36 Teranex Processor Settings