Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 54 / 969

CC Enable
‘CC enable’ is ‘off’ by default. To enable closed captioning, go to Main Menu>Ancillary
Data>Closed Caption>CC Enable and select ‘on’ using the soft menu buttons or rotary knob.
Disabling captions may be helpful if the incoming closed caption data is incorrect or corrupt.
The CC status LED on the front panel is tied to the ‘in’ or ‘out’ selection. When ‘in’ is selected,
the CC status LED will illuminate when closed captioning is detected in the input video.
When ‘out’ is selected, the CC status LED will illuminate when closed captioning data is present
in the output video.
Analog In Line
‘Analog in line’ identifies the line on which closed caption information is located in the incoming
video. This menu applies only to sources with analog closed captions. If your captions are
digital, they will be automatically detected.
‚
The range of adjustment is lines 20 to 22.
‚
The default setting is line 21.
Analog Out Line
‘Analog out line’ identifies the line on which closed caption information is located in
the output video. This menu applies only to analog SD output.
‚
The range of adjustment is lines 20 to 22.
‚
The default setting is line 21.
Service 2 Source
‘Service 2 source’ allows you to select CEA-608 CC2 or CC3 for up converting
to CEA-708, ‘service 2’.
‚
The choices are CC2 and CC3.
‚
The default setting is CC2.
Ancillary Data
Closed
Caption
Video
Index
Timecode
Ancillary Data
Menu>Closed Caption
Closed Caption
Service 2
Language
Service 1
Language
Service 2
Source
Analog
Out Line
Analog
In Line
CC
Enable
Reset
All
21
Closed Caption Menu>
Analog In Line
Closed Caption
Service 2
Language
Service 1
Language
Service 2
Source
Analog
Out Line
Analog
In Line
CC
Enable
Reset
All
21
Closed Caption Menu>
Analog Out Line
Set Value
Service 2
Language
Service 1
Language
Service 2
Source
Analog
Out Line
Analog
In Line
CC
Enable
Reset
All
CC 3
CC 2
Closed Caption Menu>
Service 2 Source
54 54 Teranex Processor Settings