Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 64 / 969

‚
Internal
Synchronizes the output of the Teranex AV to its internal freerunning oscillator, which
produces constant sync in the output stream, even when changing inputs to the unit.
External Reference Compatibility Chart
Your external reference must be compatible with the current output video format. The table
below lists the external reference signals acceptable for each output video format and frame
rate. This chart is also applicable for reference signals generated by the Teranex AV in the
Generate menu.
If external reference is selected and a valid reference signal is detected, the ‘REF’ status LED on
the front panel will illuminate. If the external reference is removed or lost, the ‘REF’ LED will be
turned off and the processor will go into a free run condition until the reference is restored.
Output Format
and Frame Rate Reference
Signal
525i59.94 NTSC Blackburst 59.94
625i50 PAL Blackburst 50
720p50 Blackburst 50
720p59.94 Blackburst 59.94, Tri-level Progressive 59.94
720p60 Tri-level Progressive 60
1080p23.98 Tri-level Progressive 23.98, Tri-level Interlaced 47.96
1080PsF23.98 Tri-level Progressive 23.98, Tri-level Interlaced 47.96
1080p24 Tri-level Progressive 24, Tri-level Interlaced 48
1080PsF24 Tri-level Progressive 24, Tri-level Interlaced 48
1080p25 Blackburst 50, Tri-level Progressive 25, Tri-level Interlaced 50
1080PsF25 Blackburst 50, Tri-level Progressive 25, Tri-level Interlaced 50
1080p29.97 Blackburst 59.94, Tri-level Progressive 29.97, Tri-level Interlaced 59.94
System Setup>Reference
Factory
Reset
Reference
Ethernet System Setup
Info
Audio
System
Setup
Ancillary
Data
Noise
Reduction
Video Main Menu
Main Menu>System Setup
Reference>Type Menu
for Teranex AV
Input
Internal
External
Reference
Pixel
Offset
Line
Offset
Type
Generate
Input
External
Reference
Pixel
Offset
Line
Offset
Type
Generate
Reference>Type Menu for
Teranex 2D, 3D and Express
64 64 Teranex Processor Settings