Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 834 / 969

Command Command Description
AudioInLevel2: Set audio level (gain) for Channel 3
AudioInLevel3: Set audio level (gain) for Channel 4
AudioInLevel4: Set audio level (gain) for Channel 5
AudioInLevel5: Set audio level (gain) for Channel 6
AudioInLevel6: Set audio level (gain) for Channel 7
AudioInLevel7: Set audio level (gain) for Channel 8
AudioInLevel8: Set audio level (gain) for Channel 9
AudioInLevel9: Set audio level (gain) for Channel 10
AudioInLevel10: Set audio level (gain) for Channel 11
AudioInLevel11: Set audio level (gain) for Channel 12
AudioInLevel12: Set audio level (gain) for Channel 13
AudioInLevel13: Set audio level (gain) for Channel 14
AudioInLevel14: Set audio level (gain) for Channel 15
AudioInLevel15: Set audio level (gain) for Channel 16
Enter the value as a whole number of gain in dB times 10 (e.g. For +4dB, enter a value of 40).
Range is -32dB (-320) to +16dB (160). Default =0.
Output Mapping
You may choose any active audio input channel, Dolby-decoded channel, test tone or mute to
be mapped to each discrete audio output channel or Dolby-encoded output channel. Dolby
encoding and decoding require optional Dolby modules, which can be installed in the
Teranex 3D only.
Available source values are:
Command Command Description
Inputs: AudioIn1 through AudioIn16
Dolby decoded inputs: AudioDD1 through AudioDD8
Test tones: TT750 (750kHz), TT1500 (1.5 kHz), TT3000 (3kHz), TT6000
(6kHz), TTMute
Please note: AudioOut0: refers to output channel 1, AudioOut1: refers to output channel 2, etc.
Command Command Description
AudioOut0: Select source to be mapped to output Ch 1.
AudioOut1: Select source to be mapped to output Ch 2.
AudioOut2: Select source to be mapped to output Ch 3.
AudioOut3: Select source to be mapped to output Ch 4.
834 834
개발자 정보