Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 357 / 969

Command Command Description
Variable Aspect Ratio size X left: Adjust horizontal image size. Negative values decrease size;
positive values enlarge the image. Default = 0
Variable Aspect Ratio size X right: Adjust horizontal image size of the Teranex 3D right eye output.
Negative values decrease size; positive values enlarge the image.
Default = 0
Variable Aspect Ratio size Y left: Adjust vertical image size. Negative values decrease size; positive
values enlarge the image. Default = 0
Variable Aspect Ratio size Y right: Adjust vertical image size of the Teranex 3D right eye output.
Negative values decrease size; positive values enlarge the image.
Default = 0
Variable Aspect Ratio pos X left: Adjust horizontal position of the image. Negative values move the
image to the left; positive values, to the right. Default = 0
Variable Aspect Ratio pos X right: Adjust horizontal position of the Teranex 3D right eye output.
Negative values move the image to the left; positive values, to the
right. Default = 0
Variable Aspect Ratio pos Y left: Adjust vertical position of the image. Negative values move the
image upward; positive values, downward. Default = 0
Variable Aspect Ratio pos Y right: Adjust vertical position of the Teranex 3D right eye output. Negative
values move the image upward; positive values, downward. Default
= 0
Variable Aspect Ratio trim X left: Trim the sides of the image. Default = 0
Variable Aspect Ratio trim X right: Trim the sides of the Teranex 3D right eye output. Default = 0
Variable Aspect Ratio trim Y left: Trim the top and bottom of the image. Default = 0
Variable Aspect Ratio trim Y right: Trim the top and bottom of the Teranex 3D right eye output. Default
= 0
Variable Aspect Ratio zoom/crop: Enables Zoom/Crop. False=OFF; True=ON (Default = False)
Video Adjust
Command Command Description
Red: Set value of Red color correction control.
Range is -200 to +200 (Default = 0)
Green: Set value of Green color correction control.
Range is -200 to +200 (Default = 0)
Blue: Set value of Blue color correction control.
Range is -200 to +200 (Default = 0)
Luma low: Set luminance low level value to clip undershoots.
Range is 4 to 1018 (Default = 4)
Luma high: Set luminance high level value to clip overshoots.
Range is 5 to 1019 (Default = 1019)
Chroma low: Set chrominance low level value to clip undershoots.
Range is 4 to 1018 (Default = 4)
357 357 Informations pour les développeurs