Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 52 / 969

Bias Menu
Adjust the ‘bias’ level to set the amount of noise reduction. The higher the ‘bias’ value, the more
aggressive the noise reduction.
‚
The Bias range is -6 to +6.
‚
The default value is 0.
Split Screen Menu
Split Screen divides the LCD, one half with noise reduction and one half without. This lets you
compare your noise reduction settings to the original image.
To enable ‘split screen’, go to Main Menu>Noise Reduction>Split Screen and select ‘on’ using
the soft menu buttons and rotary knob.
Red Overlay Menu
In ‘red overlay’ mode, pixels in motion will be colored red. Temporal recursive noise reduction
will not be applied to these pixels. Turning the ‘red overlay’ on will also allow you to see the
effect of noise reduction ‘bias’ adjustments.
To enable ‘red overlay’, go to Main Menu>Noise Reduction>Red Overlay and select ‘on’ using
the soft menu buttons and the rotary knob.
Set Value
Split
Screen
Red
Overlay
Enable
Bias
0
Noise Reduction Menu>Bias
On
Off
Split Screen
Split
Screen
Red
Overlay
Enable
Bias
Noise Reduction Menu>Split Screen
On
Off
Red Overlay
Split
Screen
Red
Overlay
Enable
Bias
Noise Reduction
Menu>Red Overlay
The red overlay helps to show which
parts of the image have temporal
recursive noise reduction applied.
52 52 Teranex Processor Settings