Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 21 / 969

Configure
The configure tab displays the name and IP address of the Teranex you are controlling.
You can assign a unique name to the unit so you can identify it when you have multiple
Teranex units in your system. Simply click in the ‘name’ field and enter a new name for
the device. The name will be seen when you are selecting a Teranex via the Teranex
Setup utility and will also be displayed in the utility’s header once connected. You can
also assign descriptive names for each preset to make it easier to identify the owner,
purpose or settings saved in the preset.
Slider Adjustments
To make adjustments, click and drag a slider with your mouse. Another way to adjust a slider is
to use the directional keys on your keyboard. The ‘up’ and ‘right’ arrows will increment the slider
by 1 unit, while the ‘left’ and ‘down’ arrows will decrement the value. You can also click in the
value box to enter a slider value directly. When needed, you can simultaneously reset all
parameters within a section to their default values by clicking the circular back arrow icon.
Settings Menu Using the Gear Icon
Clicking on the ‘settings gear’ icon reveals the settings menu used for remotely locking the
front panel and saving or recalling presets. You may also save the current Teranex settings to a
computer or load settings into a Teranex.
21 21 Changing Settings